Cooper DF6000 Manual de usuario descargar pdf (Pagina 26)

DF6000 - USER MANUAL

Output 4: Disablement of the Fire Routing Equipment

This output is ON to indicator that the ﬁre r

outing equipment has been disabled either by the

DF6000 Control and indicating equipment or the ﬁre brigade panel.

Output 5: Reset from Fire Alarm Condition

This output is ON to indicate that the DF6000 control and indicating equipment is in alarm

condition. This output will remain on for at least 15mins after reset or when the reset has

been activated from the ﬁre alarm brigade panel

Output 6: Disablement of Sounders

This output is ON to indicate that the sounders have been disabled either by the DF6000

control and indicating equipment or the rire brigade panel

Inputs

Input 1: Reset

This input is used to reset the control and indicating equipment

Input 2: Testing of Fire Routing Equipment

This input is used to test the output to the ﬁre routing equipment

Input 3: Disablement of the Fire Routing Equipment

This input is used to disable the ﬁre routing equipment if the DF6000. Once the FRE is

disabled from this interface, it can never be enabled from the DF6000 control panel

Input 4: Disablement of the Fire Protecting Equipment

This input is used to disable the ﬁre protecting equipment of the DF6000. Once the FRE is

disabled from this interface, it can never be enabled from the DF6000 control panel

Input 5: Disablement of Sounders

This input is used to disable the sounders of the DF6000. The disablement of sounders from

the ﬁre brigade panel can be re-abled from the DF6000 control panel only when the system

is not Alarm State.

Section 1 - System Installation and Design

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 113 114

Sin comentarios

Cooper DF6000 Manual de usuario Pagina 26