Cooper 9448ES Manual de servicio descargar pdf (Pagina 9)

496574 9

1. Introduction

LEDs on the keypads. To see earlier events press << (1), for later events

press >> (3).

Engineer Access

The Installer gains access to system programming by keying in 0 followed by

R and a 4-digit Engineer Access Code (default 7890). The Installer can

change the Engineer Access Code at any time while in programming mode.

The Engineer Access Code cannot set or unset the system.

Technical Description

Specification

Operating temperature = -10º to +50ºC

Humidity = 80% RH

Dimensions = 210mm W, 210mm H, 65mm D

Weight = Approx 1.1kg (without stand-by battery)

Power Supply

System Power Supply = 230VAC (Ambient Temp. 20 º. C)

Quiescent Panel Power = 50mA nominal

Active Panel Power = 150mA nominal

9427 Remote Keypad = 20mA

Standby Battery = 12 Volt, 2.1AH rechargeable lead-acid, Gel Type

battery

Battery Space = 185mm W, 55mm H, 30 mm D

Outputs

Bell, Strobe, O/P and AUX are open collector transistor outputs.

Bell = 500mA, 12VDC. negative applied

Strobe = 500mA, 12VDC. negative applied

O/P = 100mA, 12VDC. negative applied

AUX (for detectors) = 300mA, 12VDC

Caution: Maximum total current available from panel: 800mA.

Communicator Outputs = PA and Intruder, 12V positive removed.

Fuses

F1 - Battery = 1A Slow Blow

F2 - 12V AUX = 1A Fast Blow

F3 - 21 VAC = 1A Slow Blow

Caution: When replacing fuses use the ratings quoted above.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Sin comentarios

Cooper 9448ES Manual de servicio Pagina 9