Cooper M3000 Guía de usuario descargar pdf (Pagina 74)

100

101

2-34 SPARC Enterprise Mx000 Servers XSCF User’s Guide • December 2010

■ At this time, the window session is disconnected, so please reconnect to the XSCF by

using the new network interface and log in again.

4. Display the Network Configuration by using the shownetwork(8),

showhostname(8), showroute(8) and shownameserver(8) commands again and

check the new network information.

5. Use the nslookup(8) command to check the host name information.

Confirm XSCF Network Connection Status

■ Command operation

1. Use the shownetwork(8) command to display the network status.

2. Use the ping(8) command to confirm the response to network devices.

<Example> Specify the host name information scf0-hostname.

XSCF> nslookup scf0-hostname

Server: server.example.com

Address: 192.168.1.3

Name: scf0-hostname.company.com

Address: 192.168.10.10

XSCF> shownetwork -i

Active Internet connections (without servers)

Proto Recv-Q Send-Q Local Address Foreign Address State

tcp 0 0 xx.xx.xx.xx:telnet xxxx:1617 ESTABLISHE

<Example> Send packet to the host name scf0-hostname three times.

XSCF> ping -c 3 scf0-hostname

PING scf0-hostname (XX.XX.XX.XX): 56 data bytes

64 bytes from XX.XX.XX.XX: icmp_seq=0 ttl=64 time=0.1 ms

64 bytes from XX.XX.XX.XX: icmp_seq=1 ttl=64 time=0.1 ms

64 bytes from XX.XX.XX.XX: icmp_seq=2 ttl=64 time=0.1 ms

--- scf0-hostname ping statistics ---

3 packets transmitted, 3 packets received, 0% packet loss

round-trip min/avg/max = 0.1/0.1/0.1 ms

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 431 432

Comentarios a estos manuales

Sin comentarios

Cooper M3000 Guía de usuario Pagina 74

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Cooper M3000