Cooper M3000 Guía de usuario descargar pdf (Pagina 182)

2-142 SPARC Enterprise Mx000 Servers XSCF User’s Guide • December 2010

Enabling or Disabling the Mail Report Function and Specifying the

Recipient Address Used for Notification

■ Command operation

1. Set the SMTP server as described in Specifying the Host Name, Port Number, and

Reply Address of the SMTP Server. Use the showemailreport(8) command to

display mail report setting information.

2. Use the setemailreport(8) command to set mail report information.

3. Use the showemailreport(8) command to confirm mail report setting information.

4. Confirm the test mail by checking if an email with the subject "Test Mail" was

received.

2.2.13 Domain Configuration

Domain Configuration logically assigns (by partitioning) multiple system boards (XSBs)

mounted in the server to domains. One PSB can be logically divided into 1 (Not divided) or

4 units. It cannot be divided into 2 or 3. (There are two PSBs in the maximum

M4000/M5000 server configuration.)You can assign each of the divided system boards to

any of the configured domains. In the M3000 server, however, the system board cannot be

configured. The system board has been configured to 1 unit (Not divided) by default.

For details on whether to divide a PSB into 1 (Not divided) or 4 units, see Section 2.2.14,

“System Board Configuration” on page 2-170.

XSCF> showemailreport

E-Mail Reporting: disabled

<Example> Enabling the mail report function and specifying a reply

addresses

XSCF> setemailreport

Enable E-Mail Reporting? [no]: yes

E-mail Recipient Address []: xxxxx@example.com

Do you want to send a test mail now [no]?: yes

... Sending test mail to 'xxxxx@example.com'

XSCF> showemailreport

E-Mail Reporting: enabled

Recipient Address: [email protected]

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 431 432

Sin comentarios

Cooper M3000 Guía de usuario Pagina 182