Cooper 9448 Manual de usuario descargar pdf (Pagina 9)

496328 Issue 2 9 of 12

Entry time 43 ENTER 1 ENTER 10 seconds

2 ENTER 20 seconds y

3 ENTER 30 seconds

4 ENTER 45 seconds

5 ENTER 1 minute

Exit time 44 ENTER 1 ENTER 10 seconds y

2 ENTER 20 seconds

3 ENTER 30 seconds

4 ENTER 45 seconds

5 ENTER 1 minute

Zone 6 50 ENTER 0 ENTER Normal Alarm y

1 ENTER PA

Prog O/P 51 ENTER 0 ENTER PIR set latch y

1 ENTER Shock reset

Zone 1 in Part Set 52 ENTER 0 ENTER Normal Alarm y

1 ENTER Entry/Exit

Part Set Alarm 53 ENTER 0 ENTER Full Alarm y

Response 1 ENTER Internal sounder

Zone 3 54 ENTER 0 ENTER Normal Alarm y

1 ENTER Entry/Exit

Zone 5 55 ENTER 0 ENTER Normal Alarm y

1 ENTER Fire

30-second 64 ENTER 0 ENTER Enabled y

Dual Ply 1 ENTER Disabled

Keypad 1 & 3 PA 68 ENTER 0 ENTER Disabled y

1 ENTER Enabled

View Log 90 ENTER Press << for earlier events

press >> for later events.

Walk Test 97 ENTER Trigger detectors. Press OMIT to exit test.

Load Defaults 98 ENTER Does not change access codes

Leave Program 99 ENTER (See note 5.)

Notes:

1. n..n = the numbers of the zones. Key the zone number to toggle the zones

on or off. Pressing ENTER stores the zones selected. You cannot omit Entry/

Exit zone(s) in Full or Part set.

2. Program any zones not connected as "Not used".

3. The end user may change the user codes (see separate user guide).

4. Default user code 2 "0000" is inactive. Changing user code 2 back to "0000"

at any time makes the code inactive again.

5. If the internal sounder activates when you use this command then check the

lid tamper, bell tamper, and the global zone anti tamper.

9448+/9448ES Engineer Program Command List

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Cooper 9448 Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Cooper 9448